LGXEnzhuo 220V 6MM Feed Granulator Feed Pellet Mill Machine Feed Pelletizer Feed Pellet Making Machine with 2 Head Press Roller for Aquaculture Farm Feed Processing Plants 3KW

Brand: LGXEnzhuo

Features:

• [Parameters] Hard pressure plate of feed pellet machine: 6MM, output: 80-120KG, power: 3KW, voltage: 220V Single-phase electricity, main material of product: cast iron, standard pressure roller: two head pressure roller, product size: 35.8*12.6*30.18in(91*32*76.5cm).
• [Expand feed and discharge ports] The machine has enlarged the feed inlet to make feeding more convenient, and is also equipped with an enlarged and widened discharge outlet to prevent feed splashing and facilitate the collection of feed.
• [Produce nutritious and high-quality feed] Corn kernels can be directly placed into the machine. The feed processed by machines is smooth and has moderate hardness. The production process has a small temperature difference to maintain the nutrition of the feed.
• [Three head pressure roller] Adjustable nut is used to adjust the distance between the pressure roller and the grinding disc. When making particles, the nuts on all three sides must be balanced to avoid damaging the pressure roller and grinding disc.
• [Application] This product model is a new energy-saving product, and powdered feed can be easily processed into pellet feed, such as for the production of feed for large livestock, used in aquaculture farms, feed processing plants, and so on.

Details: Parameter
ard pressure plate: 6MM
Output/h: 80-120KG
power: 3KW
voltage: 220V Single-phase electricity
Product body material: cast iron
Standard pressure roller: Two head press roller
Product size: 35.8*12.6*30.18in(91*32*76.5cm)
Note:
1. Before using the machine, it is necessary to adjust the screw of the pressure roller to the appropriate position. The pressure roller and the pressure plate should be closely combined, and the three adjusting screws should be on the same horizontal plane.
2. Please refuel the fuel tank before using the machine. The machine should not idle for more than 2 minutes.
3. Double-check the belt and the screws before operation.
4. Clean up the rest after use to prevent damage to the machine.
5. If the pressure roller cannot rotate normally, please tighten the screws that control the pressure roller first, and then try to power it on. If it still does not work, you can appropriately loosen the screws next to the pressure roller and then tighten them slightly again (without special tightening).

EAN: 0198462686242