[ High Efficiency ] 215-431 sq ft/h (20～40 ㎡/h ), 8 times faster than traditional wall planer tools. With 1200W pure copper motor, the maximum speed can up to 3000rpm. A set of cutting head containing 26 alloy tungsten steel blades can cut the width of 5.9in/150mm at a time.
[ Application Range ] This tool is designed primarily for scraping off spackle, removing old paint, stripping wallpaper, and loose plaster. Can be widely used for wall renovation. It must NEVER be used on hard substrates such as concrete, brick walls, textured stone-like paint walls, as this will immediately damage the blades. NOTE: It must NEVER be used on wooden boards, as this will damage the wood surface.
[ Using Tips ] Holding the upper part of the handle will reduce pressure and fatigue during long-term use. When removing wall coverings from top to bottom, the blade rolls upwards and can basically counteract the gravity of the machine itself. Hold the upper part of the handle and do not exert too much force on the wall.
[ Adjustable Cutting Depth ] 1-4mm depth can be freely adjusted according to different thicknesses.
[ Without Dead Corners ] With a side blade, which is designed for 90° corner planning. When removing putty from dead corners of the wall, the side blade can be installed.
